New Portsmouth wind turbine will reach new heights

Posted 1/12/16

PORTSMOUTH — You’ll have to stretch your neck a little more to see the top of the new wind turbine when it goes up.

The Town Council Monday night unanimously approved a request by contractor Wind Energy Development (WED) to build a …

This item is available in full to subscribers.

Please log in to continue

Log in

Register to post events


If you'd like to post an event to our calendar, you can create a free account by clicking here.

Note that free accounts do not have access to our subscriber-only content.

Day pass subscribers

Are you a day pass subscriber who needs to log in? Click here to continue.


New Portsmouth wind turbine will reach new heights

Posted

PORTSMOUTH — You’ll have to stretch your neck a little more to see the top of the new wind turbine when it goes up.

The Town Council Monday night unanimously approved a request by contractor Wind Energy Development (WED) to build a turbine that’s 65 feet taller than the existing one. The new turbine will top out at 85 meters, or about 279 feet.

Specifically, the council approved WED’s request to amend its contract with the town in order to increase the maximum height of the new turbine by 12 meters, or about 39 feet. (Under the previous contract, WED could replace the current turbine with one that was 8 meters — about 26 feet — higher.)

Voters approved building the turbine with a $3 million bond issue in 2007. The windmill was built in 2009 but has been idle since 2012 due to a faulty gearbox supplied by a company that has since gone bankrupt.

In November 2014 the council voted to enter into a contract with WED of North Kingstown that would allow the town to pay off the remaining debt that’s left on the turbine. Under the agreement, WED was to pay a lump sum of $1.45 million to the town. In exchange, the town would buy energy generated from the new 1.5-megawatt turbine over a 25-year period at a rate of 15.5 cents per kilowatt hour.

WED owner Mark DePasquale said the 85-meter turbine is the industry standard, therefore he could get it up and running sooner because a smaller machine requires bank approval.

Ten, 85-foot turbines have already been imported from Germany for WED’s current project in Coventry, said Mr. DePasquale. One of those turbines, he said, could be brought over to Portsmouth because the Coventry project is being phased in.

Under DePasquale’s timeline, the task of taking down the current turbine should begin on Friday, Jan. 29. After that, it should take only two days to install the new machine in February, he said.

“It’s important to get this project behind us and get the bond paid off,” Mr. DePasquale said.

Promises no additional shadow flicker

He also said the taller turbine will not affect the amount of shadow flicker, which neighbors have complained about. Since it will produce more energy, a taller turbine could be shut down for brief spells during peak flicker activity. Stephen Brusini, attorney for WED, told the council that under the company’s contract with the town, the amount of shadow flicker cannot increase with the new turbine.

A taller turbine, however, would be quieter and run more efficiently, said Mr. DePasquale.

“By raising the height, it will actually produce more energy in the evening after the sun sets,” he said.

Portsmouth Town Council, Portsmouth wind turbine, Wind Energy Development

2024 by East Bay Media Group

Barrington · Bristol · East Providence · Little Compton · Portsmouth · Tiverton · Warren · Westport
Meet our staff
MIKE REGO

Mike Rego has worked at East Bay Newspapers since 2001, helping the company launch The Westport Shorelines. He soon after became a Sports Editor, spending the next 10-plus years in that role before taking over as editor of The East Providence Post in February of 2012. To contact Mike about The Post or to submit information, suggest story ideas or photo opportunities, etc. in East Providence, email mrego@eastbaymediagroup.com.